Monday, November 17, 2014

How To Unbrick/Unroot Moto G (2nd Gen) - Flash Stock 4.4.4

Motorola Firmwares Click here
Android Studio (also know as Andorid SDK): Click here
Unlock Bootloader: Click here

Copy and Paste to command prompt (in order watch video below!)
fastboot.exe flash logo logo.bin
fastboot.exe flash boot boot.img
fastboot.exe flash recovery recovery.img
fastboot.exe flash system system.img_sparsechunk.0
fastboot.exe flash system system.img_sparsechunk.1
fastboot.exe flash system system.img_sparsechunk.2
fastboot.exe flash system system.img_sparsechunk.3
fastboot.exe flash modem NON-HLOS.bin
fastboot.exe erase modemst1
fastboot.exe erase modemst2
fastboot.exe flash fsg fsg.mbn
fastboot.exe erase cache
fastboot.exe erase userdata





36 comments:

  1. motorola firmware died :( can you uploaded? thanx

    ReplyDelete
  2. Found the page...

    https://motorola-global-portal.custhelp.com/app/answers/prod_detail/a_id/99902/p/30,6720,9151

    ReplyDelete

  3. Hey there, I recently installed official android lollipop i.e., 5.0.2.
    But i didn't liked the overall performance of it so I want to downgrade my moto g2 to official kitkat 4.4.4, can you please help me. how to do that and my model no. is xt1068..
    plz help me....

    ReplyDelete
  4. [FIRMWARE][XT1032-XT1033] Firmware Lollipop Retail Brasil & Asia 5.0.2 For other models with updated flashing guide.

    http://forum.xda-developers.com/moto-g/general/firmware-firmware-lollipop-retail-t3017383

    ReplyDelete
  5. It stays on Warning page and wont move

    ReplyDelete
  6. Hi everyone, I'm posting here for your help. A few hours ago I flashed my cellphone to install GPE rom at the first time it seemed that it had worked but then I noticed that it got stuck in the google screen after this I tried to install it again and then I noticed that in the instalation process these error showed up "hab check failed for boot" and "hab check failed for recovery" and the phone got stucked in the boot image. I tried almost everything to make it work but sadly nothing worked for me. therefore, I'm asking you if you could help me, does anybody know how to fix this?? please I don't want a brick on my night table . I hope you can help me and thank you very much !!.

    ReplyDelete
  7. Here is the firmware link from Motorola... Enjoy :-)

    https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images

    ReplyDelete
  8. Hi guys,
    My XT1068 was stuck on the motorola logo and wouldn't go any further. Recovery and factory reset through the fastboot would not work so I followed the method in the video above which appeared to go successfully.
    Now it just sticks on the 'Warning Bootloader unlocked' Screen!!
    Is this a hardware issue.
    Is there anything I can do? Please help :(
    Ruairi

    ReplyDelete
    Replies
    1. I tried recovery there and it shows the android robot with a warning triangle....what does that mean?

      Delete
  9. Thanks a lot brother!Works like a charm!
    Fixed my MOTO X2 <3

    ReplyDelete
  10. Worked perfectly. Thanks a lot!!!
    For those who are confused, please note a few updates -
    1. The site listed in links is dead. Instead, go to http://firmware.center/firmware/Motorola/Moto%20G%20%282nd%20gen-2014%29/Stock/XT1068/ to download the correct firmware. I went with the latest that was available at the time of this comment - XT1068_TITAN_RETLA_DS_6.0_MPB24.65-34_cid12_CFC
    2. Follow the steps as mentioned above. They work like a charm.

    ReplyDelete
    Replies
    1. hi, I've used the same version and it's evrything ok except the phone service, the phone doesnt see the sim card, so i cannot call. It seems that it's a problem wiht the modem banda base. Any idea to fix it?

      Delete
    2. I´m having the same problem...

      Delete
    3. I´m having the same problem...

      Delete
  11. Thanks a lot brother!Fixed my MOTO X2

    ReplyDelete
  12. I Didnt unlock my bootloader but rooted it with kingroot,it said rooted successfully,when i tried to restart it says bootup failed,will this procedure work?

    ReplyDelete
    Replies
    1. unlock bootloader it will fix
      do it as the video says

      Delete
  13. wow..! worked lik a champ.. thanks alot

    ReplyDelete
  14. This comment has been removed by the author.

    ReplyDelete
  15. Hi kevin, got all steps fine but in the end I am stuck on the warning bootloader unlocked...I have moto g 2gen x1068 retail uk... can you help?

    ReplyDelete
  16. but my wifi and sim did not work

    ReplyDelete
  17. Hi, same problem here with sim cards. all perfect except for the phone signal, on both sim slots.
    help please, thx

    ReplyDelete
  18. Hi, same problem here with sim cards. all perfect except for the phone signal, on both sim slots.
    help please, thx

    ReplyDelete
    Replies
    1. i have got same problem any solutions u got..plz send to prajwaldesai1997@gmail.com

      Delete
  19. You are genius man,i'm your fan.
    Thank you so much

    ReplyDelete
  20. I have a note3 and it's IMEI certificate is failed.
    can you plz help me?

    ReplyDelete
  21. does it also work on moto G 1st generation(XT1033)

    ReplyDelete
  22. Thanks man...Now i am on 4.4 kitkat version..How can i upgrade to 6.0(Marshmellow)?
    And sim card is being detected?What to do?
    Mail me at prajwaldesai1997@gmail.com

    ReplyDelete
  23. Can't download SDK that you are using I've only got 32 bit, any ideas plz

    ReplyDelete
  24. Thanks so much bro bricked my phone and was using android marshmallow.... It woke up and running.. once again thanks a lot

    ReplyDelete
  25. Informative and insightful post. Thanks for sharing on the same.

    ReplyDelete