Monday, November 17, 2014

How To Unbrick/Unroot Moto G (2nd Gen) - Flash Stock 4.4.4

Motorola Firmwares Click here
Android Studio (also know as Andorid SDK): Click here
Unlock Bootloader: Click here

Copy and Paste to command prompt (in order watch video below!)
fastboot.exe flash logo logo.bin
fastboot.exe flash boot boot.img
fastboot.exe flash recovery recovery.img
fastboot.exe flash system system.img_sparsechunk.0
fastboot.exe flash system system.img_sparsechunk.1
fastboot.exe flash system system.img_sparsechunk.2
fastboot.exe flash system system.img_sparsechunk.3
fastboot.exe flash modem NON-HLOS.bin
fastboot.exe erase modemst1
fastboot.exe erase modemst2
fastboot.exe flash fsg fsg.mbn
fastboot.exe erase cache
fastboot.exe erase userdata





Posted by at

36 comments:

  1. UnknownNovember 30, 2014 at 3:49 PM

    motorola firmware died :( can you uploaded? thanx

    ReplyDelete
  2. UnknownNovember 30, 2014 at 4:12 PM

    Found the page...

    https://motorola-global-portal.custhelp.com/app/answers/prod_detail/a_id/99902/p/30,6720,9151

    ReplyDelete
  3. UnknownDecember 14, 2014 at 11:39 PM

    Does it harm the device

    ReplyDelete
  4. Vinayak SFebruary 21, 2015 at 9:06 AM


    Hey there, I recently installed official android lollipop i.e., 5.0.2.
    But i didn't liked the overall performance of it so I want to downgrade my moto g2 to official kitkat 4.4.4, can you please help me. how to do that and my model no. is xt1068..
    plz help me....

    ReplyDelete
  5. AnonymousMay 23, 2015 at 7:12 PM

    [FIRMWARE][XT1032-XT1033] Firmware Lollipop Retail Brasil & Asia 5.0.2 For other models with updated flashing guide.

    http://forum.xda-developers.com/moto-g/general/firmware-firmware-lollipop-retail-t3017383

    ReplyDelete
  6. UnknownJune 29, 2015 at 11:32 AM

    Motorolla firmware is dead!

    ReplyDelete
  7. UnknownJuly 12, 2015 at 9:38 PM

    It stays on Warning page and wont move

    ReplyDelete
  8. ramsaiAugust 4, 2015 at 1:16 PM

    Hi everyone, I'm posting here for your help. A few hours ago I flashed my cellphone to install GPE rom at the first time it seemed that it had worked but then I noticed that it got stuck in the google screen after this I tried to install it again and then I noticed that in the instalation process these error showed up "hab check failed for boot" and "hab check failed for recovery" and the phone got stucked in the boot image. I tried almost everything to make it work but sadly nothing worked for me. therefore, I'm asking you if you could help me, does anybody know how to fix this?? please I don't want a brick on my night table . I hope you can help me and thank you very much !!.

    ReplyDelete
  9. Abhishek SinghSeptember 26, 2015 at 2:19 AM

    Here is the firmware link from Motorola... Enjoy :-)

    https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images

    ReplyDelete
  10. UnknownNovember 1, 2015 at 3:55 AM

    no need for SDK tools..

    ReplyDelete
  11. UnknownFebruary 23, 2016 at 7:47 PM

    Hi guys,
    My XT1068 was stuck on the motorola logo and wouldn't go any further. Recovery and factory reset through the fastboot would not work so I followed the method in the video above which appeared to go successfully.
    Now it just sticks on the 'Warning Bootloader unlocked' Screen!!
    Is this a hardware issue.
    Is there anything I can do? Please help :(
    Ruairi

    ReplyDelete
    Replies
    1. UnknownFebruary 23, 2016 at 7:49 PM

      I tried recovery there and it shows the android robot with a warning triangle....what does that mean?

      Delete
  12. UnknownMarch 12, 2016 at 4:49 AM

    Thaaaaanks!

    ReplyDelete
  13. Krishnan RApril 15, 2016 at 3:07 PM

    Thanks a lot brother!Works like a charm!
    Fixed my MOTO X2 <3

    ReplyDelete
  14. qUaCkYApril 16, 2016 at 12:39 PM

    Worked perfectly. Thanks a lot!!!
    For those who are confused, please note a few updates -
    1. The site listed in links is dead. Instead, go to http://firmware.center/firmware/Motorola/Moto%20G%20%282nd%20gen-2014%29/Stock/XT1068/ to download the correct firmware. I went with the latest that was available at the time of this comment - XT1068_TITAN_RETLA_DS_6.0_MPB24.65-34_cid12_CFC
    2. Follow the steps as mentioned above. They work like a charm.

    ReplyDelete
    Replies
    1. CristinaMay 15, 2016 at 7:12 AM

      hi, I've used the same version and it's evrything ok except the phone service, the phone doesnt see the sim card, so i cannot call. It seems that it's a problem wiht the modem banda base. Any idea to fix it?

      Delete
    2. MABJune 3, 2016 at 2:54 PM

      I´m having the same problem...

      Delete
    3. KoustavAugust 12, 2016 at 4:57 AM

      I´m having the same problem...

      Delete
  15. AnonymousApril 20, 2016 at 5:49 PM

    Thanks a lot brother!Fixed my MOTO X2

    ReplyDelete
  16. AnonymousMay 24, 2016 at 1:40 AM

    I Didnt unlock my bootloader but rooted it with kingroot,it said rooted successfully,when i tried to restart it says bootup failed,will this procedure work?

    ReplyDelete
    Replies
    1. black hawkMay 25, 2016 at 10:56 AM

      unlock bootloader it will fix
      do it as the video says

      Delete
  17. AnonymousMay 24, 2016 at 3:15 AM

    thanksss

    ReplyDelete
  18. UnknownJune 29, 2016 at 12:31 AM

    wow..! worked lik a champ.. thanks alot

    ReplyDelete
  19. UnknownJune 29, 2016 at 12:34 AM

    This comment has been removed by the author.

    ReplyDelete
  20. GarincoAugust 4, 2016 at 12:18 PM

    Hi kevin, got all steps fine but in the end I am stuck on the warning bootloader unlocked...I have moto g 2gen x1068 retail uk... can you help?

    ReplyDelete
  21. KoustavAugust 12, 2016 at 4:56 AM

    but my wifi and sim did not work

    ReplyDelete
  22. UnknownAugust 17, 2016 at 8:16 AM

    Hi, same problem here with sim cards. all perfect except for the phone signal, on both sim slots.
    help please, thx

    ReplyDelete
  23. UnknownAugust 17, 2016 at 8:58 AM

    Hi, same problem here with sim cards. all perfect except for the phone signal, on both sim slots.
    help please, thx

    ReplyDelete
    Replies
    1. UnknownNovember 3, 2016 at 3:21 AM

      i have got same problem any solutions u got..plz send to prajwaldesai1997@gmail.com

      Delete
  24. UnknownAugust 18, 2016 at 4:17 PM

    You are genius man,i'm your fan.
    Thank you so much

    ReplyDelete
  25. UnknownAugust 18, 2016 at 4:18 PM

    I have a note3 and it's IMEI certificate is failed.
    can you plz help me?

    ReplyDelete
  26. UnknownNovember 3, 2016 at 1:46 AM

    does it also work on moto G 1st generation(XT1033)

    ReplyDelete
  27. UnknownNovember 3, 2016 at 3:23 AM

    Thanks man...Now i am on 4.4 kitkat version..How can i upgrade to 6.0(Marshmellow)?
    And sim card is being detected?What to do?
    Mail me at prajwaldesai1997@gmail.com

    ReplyDelete
  28. AnonymousApril 25, 2017 at 6:02 PM

    Can't download SDK that you are using I've only got 32 bit, any ideas plz

    ReplyDelete
  29. RatulJune 9, 2017 at 2:23 AM

    Thanks so much bro bricked my phone and was using android marshmallow.... It woke up and running.. once again thanks a lot

    ReplyDelete
  30. hotmail emailAugust 10, 2018 at 4:22 AM

    Informative and insightful post. Thanks for sharing on the same.

    ReplyDelete

Subscribe to: Post Comments (Atom)